Heavy duty welded steel construction for
permanent rigid structure for absorbing machine
vibration and operator movement.
Heavy weight stand integrating with large 4-inch
wheel, total lock casters for solid stationary
positioning of stand or quick mobility to
Stands nest and stack for compact storage
without disassembling and later assembling.
Upward travel is limited by combining a hardened
steel insert into the driven threaded rod for a
positive mechanical stop.
Motors are protected from burn out because there
is a built in thermal protection shut off switch
with automatic restart.
Bevel gears that turn the precision drive rods
inside two-inch long precision nuts are sintered
to JTC specifications with copper infiltrated
metals for exacting tolerances and optimum
toughness and hardness.
All sprockets and chains are heat-treated for
Lubrication may be required on an annual basis
but is easily accomplished with multipurpose
grease by opening black caps at each gear box
and accessing grease fitting behind protection
plate at inside top of each upright support
which lubricates drive screws.
Large easy to access and grasp handles provide
effortless top tilt forward or away from
Top T-bar supports are easily repositioned for
adjusting range of motion height. Usually the
factory setting meets all needs.
All stands can readily be converted to a
three-power leg configuration by purchasing a
third leg attachment.
Stands are powder-coated with urethane for a
high-gloss, durable, forgiving finish.
Pre-engineered for task rack or third leg
attachment setup. Internal safety stops.
Lifting capacity of 550 lbs.
UL & C UL listed - CSA & CE
certified - Switches meet NEMA standards
Johnson Technologies Corporation warrants
ERGOBUDDY® Products to be constructed with top
quality design, materials and workmanship
satisfying the highest industrial standards.